Guangxi Nanning Zhengxu New Energy Technology Co., Ltd.

Nowadays, energy saving in household appliances has become a hot topic. When it comes to electrical appliances, many people will pay attention to saving money and energy when purchasing water heaters. It is precisely because the air energy
series of products are energy-saving and environmentally friendly. What is closer to the public is that using air energy products can save money, and the use time is relatively long, so how can we make the air energy products last longer, then I should pay attention to the use of air energy products Precautions before and after installation of the energy water heater
1. Installation location of the water heater
In a closed balcony, the closed balcony is a semi-open space. You can control the installation of the water heater independently. In this position, it can be used as an air conditioner in summer. (Suitable for lunch break)
In winter, a fresh fan replaces the air, making it an excellent installation location. Customers with strong wishes in the Northeast must install it in this location.
, outdoor terraces, the terraces in front and back of large houses are also very suitable for installing air energy, which is convenient and safe.
, air conditioning unit, generally houses have air conditioning units, this location is also very suitable for installing air energy with slight improvement. If you encounter a narrow air conditioning unit, it cannot be installed
.
, small platforms outside the wall, beams and columns, these locations may require some reinforcement to install water heaters.
On the roof platform, air energy can be installed where solar energy was originally installed. Pay attention to the presence of hot and cold water pipes, and the power sockets must have waterproof boxes (you can ask for a gift when purchasing the Nuanyangyang brand
).
, bathroom, kitchen, if the bathroom or kitchen is relatively spacious, it can also be installed in these places, but attention must be paid to the layout of drainage facilities.
, wall-mounted installation, wall-mounted installation has certain risks, customers should try not to choose it, because it may fall if they encounter earthquakes and other vibrations. If the customer insists on
wall-mounted installation,
, Under the same conditions, the closest location to the kitchen is preferred. The most frequently used hot water is the kitchen, followed by the public toilet. The closer the distance, the less cold water the water heater has. After a year,
% of the hot water is used by the kitchen.
, with drainage facilities
When installing an air-energy water heater, condensation water will be discharged during use, so the installation location must have floor drains, ditches and other drainage facilities.
, instrument installation location
The instrument, that is, the control panel, needs to be installed nearby to avoid being exposed to rain. Since most operating modes choose economic mode, the control panel is rarely operated in fact, so there is no need to install it
It can be installed in a very conspicuous position on the wall of balconies and corridors.
, water pipe layout
The preferred pipe for the inlet and outlet pipes of air-energy water heaters (commonly known as branch pipes), pay attention to whether the water pipe screws are or separate pipes. The air-energy water heater is a central water heater, and the water outlet pipe is actually a main pipe
The diameter must be Larger, this can avoid the phenomenon of hot and cold. For customers who install a return water device, the caliber of the return water pipe only needs to be specified.
, Power socket
The power socket is a three-pin plug, with a wire diameter of 1.2 square meters (or more), and it is best to have a waterproof box.
, Testing procedures
, Connect the cold water pipe first, and the cold water pipe is connected to the water inlet with a safety valve (the cold water pipe interface should be equipped with a maintenance valve)
, Fill the water tank, it is best to fill the water tank with water. An important link (water filling must be completed before the hot water pipe is connected), after water flows out of the hot water outlet (indicating that the water tank has been
filled with water), close the valve, stop water filling
and connect the hot water pipe. Open the water inlet valve
, plug in the power cord and start the machine for operation
, check the water pipes and wires, listen to the sound, check the fan, observe the instruments, and complete the test after the operation is normal.
Do not move the water temperature probe at will
The water temperature probe cannot be separated from the blind leg of the water tank temperature detection to avoid overheating of the unit heater and damage to the unit.
. The temperature of hot water should be appropriate. When the temperature of hot water is above 10 degrees, a mixture of hot and cold water must be used to avoid burns.
When selecting fuses, do not use copper wire or iron wire instead, as this may cause malfunction or cause a fire.
Confirm that the main power supply of the electrical equipment must meet the power requirements of the heat pump water heater, and the electricity must meet the national civil/commercial requirements. Otherwise, the unit may be damaged due to overvoltage, undervoltage operation, or even a fire.
. Leakage protection switch customers should install leakage protection switches with equal power and good grounding performance.
After the air source water heater is installed, you should also pay attention to the precautions for use
The air source water heater is a highly automated device. Regular inspections of the unit status should be carried out during use. If the unit can be maintained effectively for a long time, With maintenance, the operating reliability and service life of the unit will be unexpectedly improved.
. The water filter installed outside the machine should be cleaned regularly to ensure clean water quality in the system to avoid damage to the main unit due to dirty filters and blockage.
When using and maintaining the heat pump unit, users should note that all safety protection devices in the unit have been set before leaving the factory. Do not disassemble or adjust them by yourself.
For air source water heaters, always check whether the power supply of the unit and the wiring of the electrical system are firm, and whether the electrical components are operating abnormally. If so, they should be repaired and replaced in time.
. Frequently check whether the water replenishment, water tank safety valve, liquid level controller and exhaust device of the water system are working properly to prevent air from entering the system and causing a reduction in water circulation,
thus affecting the heating capacity and operation of the unit. reliability.
Check whether the water pump and water valves are working properly, and whether the water pipes and water pipe joints are leaking.
The area around the unit should be kept clean, dry and well ventilated. The air side heat exchanger should be cleaned every year to maintain good heat exchange effect.